High-speed and large-scale intrinsically stretchable integrated circuits.

Intrinsically stretchable electronics with skin-like mechanical properties have been identified as a promising platform for emerging applications ranging from continuous physiological monitoring to real-time analysis of health conditions, to closed-loop delivery of autonomous medical treatment1-7. However, current technologies could only reach electrical performance at amorphous-silicon level (that is, charge-carrier mobility of about 1 cm2 V-1 s-1), low integration scale (for example, 54 transistors per circuit) and limited functionalities8-11. Here we report high-density, intrinsically stretchable transistors and integrated circuits with high driving ability, high operation speed and large-scale integration. They were enabled by a combination of innovations in materials, fabrication process design, device engineering and circuit design. Our intrinsically stretchable transistors exhibit an average field-effect mobility of more than 20 cm2 V-1 s-1 under 100% strain, a device density of 100,000 transistors per cm2, including interconnects and a high drive current of around 2 µA µm-1 at a supply voltage of 5 V. Notably, these achieved parameters are on par with state-of-the-art flexible transistors based on metal-oxide, carbon nanotube and polycrystalline silicon materials on plastic substrates12-14. Furthermore, we realize a large-scale integrated circuit with more than 1,000 transistors and a stage-switching frequency greater than 1 MHz, for the first time, to our knowledge, in intrinsically stretchable electronics. Moreover, we demonstrate a high-throughput braille recognition system that surpasses human skin sensing ability, enabled by an active-matrix tactile sensor array with a record-high density of 2,500 units per cm2, and a light-emitting diode display with a high refreshing speed of 60 Hz and excellent mechanical robustness. The above advancements in device performance have substantially enhanced the abilities of skin-like electronics.

Scirpusin B isolated from Passiflora edulis Var. flavicarpa attenuates carbohydrate digestive enzymes, pathogenic bacteria and oral squamous cell carcinoma.

Passiflora edulis Var. flavicarpa (passion fruit) generates vast waste (60-70%) in the form of peel and seed after the juice extraction. The study aimed to isolate Scirpusin B (SB) from passion fruit (PF) seed waste collected from Northeast India and to analyse its anti-radical, antibacterial, anti-diabetic, and anti-oral cancer activities. Scirpusin B was isolated following hydro-alcoholic extraction, fractionation, and column chromatography. The isolated fraction was further identified through NMR and mass spectroscopy. SB exhibited significant antiradical activity against six standard antioxidant compounds, indicating its commercial application. SB inhibited α-amylase (IC50 Value: 76.38 ± 0.25 µg/mL) and α-glucosidase digestive enzymes (IC50 Value: 2.32 ± 0.04 µg/mL), signifying its antidiabetic properties. In addition, SB showed profound antibacterial activity against eight gram-positive and gram-negative bacteria reported for the first time. Furthermore, SB inhibited SAS and TTN oral cancer cell proliferation up to 95% and 83%, respectively. SB significantly inhibited colonies of SAS and TTn cells in the clonogenic assay, attributing to its anticancer properties. The PI-FACS assay confirmed the ability of SB (75 µM) to kill SAS and TTn cells by 40.26 and 44.3% in 72 h. The mechanism of SB inhibiting oral cancer cell proliferation was understood through western blot analysis, where SB significantly suppressed different cancer hallmark proteins, such as TNF-α, survivin, COX-2, cyclin D1, and VEGF-A. The present study suggests that SB isolated from PF seed can add noteworthy value to the waste biomass for various industrial and medical applications. Supplementary Information: The online version contains supplementary material available at 10.1007/s13205-023-03876-6.

Use of suction electrodes for measurement of intrinsic tongue muscular endurance during lingual pressure generation.

BACKGROUND: Lingual pressure (LP) generation is cooperatively controlled not only by the intrinsic tongue (I-ton) muscles but also by hyoid muscle activation. However, the measurement of endurance and fatigue properties of I-ton muscles is difficult due to the instability of electrodes. OBJECTIVE: The purpose of this study was to apply suction electrodes to measure electromyograms (EMGs) of I-ton muscle and to evaluate integrated EMG amplitude (iEMG) and mean power frequency (MPF) of EMG in the I-ton and hyoid muscles performing continuous LP. METHODS: Twenty healthy adult volunteers (10 males, 10 females, mean age 28.8 years) were instructed to perform 10-s LP generation tasks at 25%, 50%, 75% and 100% of maximum LP in randomised order with visual feedback. During each task, EMGs of the I-ton, suprahyoid (S-hyo), infrahyoid (I-hyo) and masseter (Mass) muscles were simultaneously recorded. The iEMG and MPF of EMG burst during 10-s LP tasks were compared. The recording period was divided into three substages to analyse temporal changes with the Friedman test. RESULTS: During the 10-s task, the iEMG significantly increased as the LP strength increased (p < .001). There was no time-dependent change in the I-ton iEMG; however, the MPF of the I-ton EMG burst decreased in all tasks (p < .05). The S-hyo and I-hyo iEMGs gradually increased, especially with strong LP (p < .01). CONCLUSION: While I-ton muscles may easily fatigue during 10-s LP generation, S-hyo and I-hyo muscles may help compensate for the weakened I-ton muscle activity by increasing their activity to maintain LP.

An infant with a vertical vein aneurysm in a supracardiac totally anomalous pulmonary venous connection.

Massive vertical vein aneurysm in a supracardiac total anomalous pulmonary venous connection is rare. Herein, vertical vein aneurysm with total anomalous pulmonary venous connection and additional pathological findings are reported in a young child.

Apoptotic mechanism in human brain microvascular endothelial cells triggered by 4'-iodo-α-pyrrolidinononanophenone: Contribution of decrease in antioxidant properties.

In this study, we newly synthesized four α-pyrrolidinononanophenone (α-PNP) derivatives [4'-halogenated derivatives and α-pyrrolidinodecanophenone (α-PDP)], and then performed the structure-cytotoxicity relationship analyses. The results showed the rank order for the cytotoxic effects, α-PNP < α-PDP < 4'-fluoro-α-PNP < 4'-chrolo-α-PNP < 4'-bromo-α-PNP < 4'-iodo-α-PNP (I-α-PNP), and suggest that cytotoxicities of 4'-halogenated derivatives were more intensive than that of elongation of the hydrocarbon chain (α-PDP). We also surveyed the apoptotic mechanism of I-α-PNP in brain microvascular endothelial (HBME) cells that are utilized as the in vitro model of the blood-brain barrier. HBME cell treatment with I-α-PNP facilitated the apoptotic events (caspase-3 activation, externalization of phosphatidylserine, and DNA fragmentation), which were almost completely abolished by pretreating with antioxidants. In addition, the immunofluorescent staining revealed the enhanced production of hydroxyl radical in mitochondria by the I-α-PNP treatment, inferring that the I-α-PNP treatment triggers the apoptotic mechanism dependent on the enhanced ROS production in mitochondria. The treatment with I-α-PNP increased the production of cytotoxic aldehyde 4-hydroxy-2-nonenal and decreased the amount of reduced glutathione. Additionally, the treatment decreased the 26S proteasome-based proteolytic activities and aggresome formation. These results suggest that decrease in the antioxidant properties is also ascribable to HBME cell apoptosis elicited by I-α-PNP.

High-frequency and intrinsically stretchable polymer diodes.

Skin-like intrinsically stretchable soft electronic devices are essential to realize next-generation remote and preventative medicine for advanced personal healthcare1-4. The recent development of intrinsically stretchable conductors and semiconductors has enabled highly mechanically robust and skin-conformable electronic circuits or optoelectronic devices2,5-10. However, their operating frequencies have been limited to less than 100 hertz, which is much lower than that required for many applications. Here we report intrinsically stretchable diodes-based on stretchable organic and nanomaterials-capable of operating at a frequency as high as 13.56 megahertz. This operating frequency is high enough for the wireless operation of soft sensors and electrochromic display pixels using radiofrequency identification in which the base-carrier frequency is 6.78 megahertz or 13.56 megahertz. This was achieved through a combination of rational material design and device engineering. Specifically, we developed a stretchable anode, cathode, semiconductor and current collector that can satisfy the strict requirements for high-frequency operation. Finally, we show the operational feasibility of our diode by integrating it with a stretchable sensor, electrochromic display pixel and antenna to realize a stretchable wireless tag. This work is an important step towards enabling enhanced functionalities and capabilities for skin-like wearable electronics.

High Energy Density Shape Memory Polymers Using Strain-Induced Supramolecular Nanostructures.

Shape memory polymers are promising materials in many emerging applications due to their large extensibility and excellent shape recovery. However, practical application of these polymers is limited by their poor energy densities (up to ∼1 MJ/m3). Here, we report an approach to achieve a high energy density, one-way shape memory polymer based on the formation of strain-induced supramolecular nanostructures. As polymer chains align during strain, strong directional dynamic bonds form, creating stable supramolecular nanostructures and trapping stretched chains in a highly elongated state. Upon heating, the dynamic bonds break, and stretched chains contract to their initial disordered state. This mechanism stores large amounts of entropic energy (as high as 19.6 MJ/m3 or 17.9 J/g), almost six times higher than the best previously reported shape memory polymers while maintaining near 100% shape recovery and fixity. The reported phenomenon of strain-induced supramolecular structures offers a new approach toward achieving high energy density shape memory polymers.

A design strategy for high mobility stretchable polymer semiconductors.

As a key component in stretchable electronics, semiconducting polymers have been widely studied. However, it remains challenging to achieve stretchable semiconducting polymers with high mobility and mechanical reversibility against repeated mechanical stress. Here, we report a simple and universal strategy to realize intrinsically stretchable semiconducting polymers with controlled multi-scale ordering to address this challenge. Specifically, incorporating two types of randomly distributed co-monomer units reduces overall crystallinity and longer-range orders while maintaining short-range ordered aggregates. The resulting polymers maintain high mobility while having much improved stretchability and mechanical reversibility compared with the regular polymer structure with only one type of co-monomer units. Interestingly, the crystalline microstructures are mostly retained even under strain, which may contribute to the improved robustness of our stretchable semiconductors. The proposed molecular design concept is observed to improve the mechanical properties of various p- and n-type conjugated polymers, thus showing the general applicability of our approach. Finally, fully stretchable transistors fabricated with our newly designed stretchable semiconductors exhibit the highest and most stable mobility retention capability under repeated strains of 1,000 cycles. Our general molecular engineering strategy offers a rapid way to develop high mobility stretchable semiconducting polymers.

Multivalent Assembly of Flexible Polymer Chains into Supramolecular Nanofibers.

Polymeric materials in nature regularly employ ordered, hierarchical structures in order to perform unique and precise functions. Importantly, these structures are often formed and stabilized by the cooperative summation of many weak interactions as opposed to the independent association of a few strong bonds. Here, we show that synthetic, flexible polymer chains with periodically placed and directional dynamic bonds collectively assemble into supramolecular nanofibers when the overall molecular weight is below the polymer's critical entanglement molecular weight. This causes bulk films of long polymer chains to have faster dynamics than films of shorter polymer chains of identical chemical composition. The formation of nanofibers increases the bulk film modulus by over an order of magnitude and delays the onset of terminal flow by more than 100 °C, while still remaining solution processable. Systematic investigation of different polymer chain architectures and dynamic bonding moieties along with coarse-grained molecular dynamics simulations illuminate governing structure-function relationships that determine a polymer's capacity to form supramolecular nanofibers. This report of the cooperative assembly of multivalent polymer chains into hierarchical, supramolecular structures contributes to our fundamental understanding of designing biomimetic functional materials.

Understanding the Regioselectivity in the Oxidative Condensation of Catechins Using Pyrogallol-type Model Compounds.

Catechins are found in many foods, including tea. These compounds are bioactive. Previous studies have shown that catechins form dimers on oxidation, and there seem to be distinct regioselective effects. However, the dimerization mechanism and regioselectivity are not well understood. Therefore, we investigated the oxidation of four pyrogallol-type model compounds of epigallocatechin (EGC) having various substituents with 1 equiv of copper chloride and 30% dioxane in water. Compounds having 2C-2C or 2C-4C bonds in the B-ring were obtained in different product ratios. Comparison of the oxidation rates of each compound revealed that the model compounds having an oxygen atom corresponding to the 1-position of the C-ring of EGC underwent slow oxidation. In addition, using density functional theory calculations, we found that the highest occupied molecular orbital energies of these compounds were higher than those of the others. Further, the 2C-2C-bonded oxidation product having an A-ring and an oxygen atom at the C-ring 1-position was confirmed to have the highest thermodynamic stability. From these results, it is suggested that the regioselective condensation reaction of the catechin B-ring is related to interactions between the A-rings, as indicated by earlier studies, and the presence of oxygen at the 1-position of the C-ring in EGC.

The Effect of Alkyl Chain Length on Well-Defined Fluoro-Arylated Polythiophenes for Temperature-Dependent Morphological Transitions.

Understanding the relationship between the molecular structure and morphological behaviors of well-defined semiconducting polymers is essential for developing novel conjugated building blocks and determining the origin of the functional characteristics of semiconducting polymers. Here, we provide insights into the significant temperature-dependent morphological transitions of novel well-defined polythiophene derivatives with m-alkoxy-substituted fluoro-aryl side units: poly(3-(4-fluoro-3-(hexyloxy)phenyl)thiophene) (PHFPT) and poly(3-(4-fluoro-3-(dodecyloxy)phenyl)thiophene) (PDFPT). We found that these unique morphological transitions depend on the alkyl chain length of the substituted fluoro-aryl side units. In PHFPT with short alkyl chains, the thermal treatment promotes a crowded interdigitated packing structure, resulting in narrow lamellar spacings in its crystalline structure. In contrast, the long alkyl chain of PDFPT acts as a physical spacer and disturbs the crowded interdigitation. In addition, the thermal treatment induces the backbone planarization and an ordered packing morphology in PDFPT. These demonstrations provide a critical milestone for the phase transitions of semiconducting polymers with conjugated side units.

A Versatile and Efficient Strategy to Discrete Conjugated Oligomers.

An efficient and scalable strategy to prepare libraries of discrete conjugated oligomers (D = 1.0) using the combination of controlled polymerization and automated flash chromatography is reported. From this two-step process, a series of discrete conjugated materials from dimers to tetradecamers could be isolated in high yield with excellent structural control. Facile and scalable access to monodisperse libraries of different conjugated oligomers opens pathways to designer mixtures with precise composition and monomer sequence, allowing exquisite control over their physical, optical, and electronic properties.

Controlled Synthesis of Poly(p-phenylene) Using a Zincate Complex, t Bu4 ZnLi2.

Well-defined poly(2,5-dihexyloxyphenylene-1,4-diyl) (PPP) is successfully synthesized by the Negishi catalyst-transfer polycondensation (NCTP) using dilithium tetra(tert-butyl)zincate (t Bu4 ZnLi2 ). The obtained PPP possesses the number-averaged molecular weight (Mn ) values in the range of 2100-22 000 and the molar-mass dispersity (ÐM ) values in the range of 1.09-1.23. In addition, block copolymers containing PPP and poly(3-hexylthiophene) (P3HT) segments (PPP-b-P3HT) are synthesized to confirm the feasibility of chain extension between the different monomers based on NCTP.

Synthesis and Characterization of Multicomponent ABC- and ABCD-Type Miktoarm Star-Branched Polymers Containing a Poly(3-hexylthiophene) Segment.

The new series of ABC-type miktoarm star polymer (ABC star, A = polyisoprene (PI), B = polystyrene (PS), and C = poly(3-hexylthiophene) (P3HT)) and ABCD-type miktoarm star polymer (ABCD star, A = PI, B = PS, C = poly(α-methylstyrene) (PαMS), and D = P3HT) could be synthesized by the combination of the controlled KCTP, anionic linking reaction, and Click chemistry. By the copper(I)-catalyzed Huisgen 1,3-dipolar cycloaddition click reaction of the azido-chain-end-functional P3HT (P3HT-N3) with the alkyne-in-chain-functional AB diblock copolymer (A = PI and B = PS) (AB-alkyne) or alkyne-core-functional ABC miktoarm star polymer (A = PI, B = PS, and C = PαMS) (ABC-alkyne), the target ABC star and ABCD star, respectively, were obtained, as confirmed by size exclusion chromatography (SEC) and proton nuclear magnetic resonance (1H NMR). The thermal and optical properties of these star polymers were examined by thermal gravimetric analysis (TGA) and UV-vis spectroscopy. The dynamic scattering calorimetry (DSC), atomic force micrograph (AFM) image, and grazing incidence small-angle X-ray scattering (GISAXS) results showed that the periodic P3HT fibril nanostructures rather than microphase separation occurred in the ABCD star film. In addition, it was found that highly crystalline P3HT domains aligned in the "edge-on" orientation, as supported by grazing incidence wide-angle X-ray scattering (GIWAXS).